Identify the system maintenance switch (#2 in the diagram below) and flip the switch in position #1 to ON. Are these systems completely new, or was some configuration applied by another party? You can set the ILO Security DIP switch on the server's motherboard. One more item if you're really having a problem getting the prompt. The system will continue booting once you exit the BIOS utility. Here, you can make your ILO changes and save them. After the ambient temperature display, you will receive a prompt to 'Press any key to view Option ROM messages' - Press any alpha-key on the keyboard at this point.įrom that point, you'll have < 0:14 to the point where the ILO3 configuration prompt surfaces.

The 'Sea of Sensors' POST routine takes roughly 1:50 from the first screen prompt (on a warm-boot) to step through RAM checks and to register the sensors. 1:08 - Black screen to first displayĠ:41 - Temperature and sensor registration (Press any alpha-key when prompted)Ġ:10 - Time before ILO3 prompt (Press `F8` for ILO3 configuration) I'm running this step-through on an HP ProLiant D元60 G7 server to show you the critical points to make your keyboard selections. This may be helpful given the number of systems you have to build. Also, there's a way to script the ILO and BIOS configs in a pre-boot environment (see: conrep). Note: You can also configure the ILO directly from the HP SmartStart DVD included with the system. The key to entering the ILO BIOS setup utility on current-firmware G6 or G7 ProLiants is to follow the prompts very carefully and get the timing just right.

Hp ilo 3 license key